OV7670 VGA Camera Module

CreateLabz StoreSKU: 20-063

Price:
₱365

Shipping calculated at checkout

Stock:
Only 3 units left

Description

Item specifics:

    • Condition:New
    • Dissatn Power: 60mW
    • Operating Temperature: -30-70
    • Application: Camera
    • Supply Voltage: 2.5-3.0V
    • Model Number: OV7670
    • Is it customized: Yes
Product Description:
This module data upgrade: increase to provide keil compiled C8051 reference program and Camera test reference drawings. At the same time provide STM32 IO port direct drive routines.

Module pin definition as shown:
3V3-----Input power supply voltage (3.3,5V is recommended but not recommended)
GDN-----grounding point
SIO_C---Control clock of SCCB interface (Note: Some low-level microcontrollers require pull-up control, similar to I2C interface)
SIO_D--- Serial data input (out) side of SCCB interface (Note: Some low-level microcontrollers need pull-up control, similar to I2C interface)
VSYNC---frame synchronization signal (output signal)
HREF----Line synchronization signal (output signal)
PCLK----pixel clock (output signal)
D0-D7---Data port (output signal)
RESTE---Reset port (normal use pull up)
PWDN----power consumption selection mode (normal use low)
For OV7670 with fifo please contact us


    OV7670 image sensor, small size, low operating voltage, provides all functions of a single VGA camera and image processor. Through the SCCB bus control, various resolution 8-bit impact data such as full frame, sub-sampling, and window sampling can be output. The product VGA image up to 30 frames / sec. Users can fully control image quality, data format, and transmission methods. All image processing functions including gamma curve, white balance, saturation, chroma, etc. can be programmed via the SCCB interface.

● High sensitivity for low illumination applications
● Low voltage for embedded applications
● Standard SCCB interface, compatible with I2C interface
● RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV(4:2:2) and YCbCr(4:2:2) output formats
● Support VGA, CIF, and various sizes from CIF to 40x30
● VarioPixel subsampling
● Automatic influence control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light streaks, automatic black level calibration, image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
● ISP can eliminate noise and dead point compensation
● Support image zoom
● Lens loss compensation
● 50/60Hz automatic detection
● Saturation is automatically adjusted (UV adjustment)
● Edge enhancement automatic adjustment
● Noise reduction automatic adjustment

key parameter:
(1) Photoreceptor array 640X480;
(2) IO voltage 2.5V to 3.0V (internal LDO power supply to the core 1.8V);
(3) power operation 60mW/15fpsVGAYUV;
(4) sleep <20μA;
(5) temperature operation - 30°C to 70°C;
(6) Stable operation 0°C to 50°C;
(7) Output format (8-bit)? YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data Light
(8) Size 1/6"
(9) Field of View 25°
(10) Maximum rms rate 30fps VGA Sensitivity 1.3V/(Lux-sec);
(11) Signal to Noise Ratio 46 dB;
(12) Dynamic Range 52dB
(13) Browsing mode line by line;
(14) electron exposure 1 line to 510 lines;
(15) pixel area 3.6 μm x 3.6 μm;
(16) dark current 12 mV/s at 60°C;



Payment & Security

Bitcoin Bitcoin Cash Ethereum JCB Litecoin Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

Customers who bought this item also viewed

You recently viewed this item