OV7670 VGA Camera Module

SKU: 20-063

365.00

LOCAL PICKUP @ OUR SHOP! Within Davao City.

P 190 FLAT-RATE DELIVERY! For orders less than 2kg, anywhere in the Philippines. For orders more than 2kg, delivery charges may vary.

Category:
  • Description
  • Reviews (0)

Description

Item specifics:
  • Condition:New
  • Dissipation Power: 60mW
  • Operating Temperature: -30-70
  • Application: Camera
  • Supply Voltage: 2.5-3.0V
  • Model Number: OV7670
  • Is it customized: Yes
Product Description:
This module data upgrade: increase to provide keil compiled C8051 reference program and Camera test reference drawings. At the same time provide STM32 IO port direct drive routines.
Module pin definition as shown:

 

3V3—–Input power supply voltage (3.3,5V is recommended but not recommended)
GDN—–grounding point
SIO_C—Control clock of SCCB interface (Note: Some low-level microcontrollers require pull-up control, similar to I2C interface)
SIO_D— Serial data input (out) side of SCCB interface (Note: Some low-level microcontrollers need pull-up control, similar to I2C interface)
VSYNC—frame synchronization signal (output signal)
HREF—-Line synchronization signal (output signal)
PCLK—-pixel clock (output signal)
D0-D7—Data port (output signal)
RESTE—Reset port (normal use pull up)
PWDN—-power consumption selection mode (normal use low)
For OV7670 with fifo please contact us
    OV7670 image sensor, small size, low operating voltage, provides all functions of a single VGA camera and image processor. Through the SCCB bus control, various resolution 8-bit impact data such as full frame, sub-sampling, and window sampling can be output. The product VGA image up to 30 frames / sec. Users can fully control image quality, data format, and transmission methods. All image processing functions including gamma curve, white balance, saturation, chroma, etc. can be programmed via the SCCB interface.
● High sensitivity for low illumination applications
● Low voltage for embedded applications
● Standard SCCB interface, compatible with I2C interface
● RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV(4:2:2) and YCbCr(4:2:2) output formats
● Support VGA, CIF, and various sizes from CIF to 40×30
● VarioPixel subsampling
● Automatic influence control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light streaks, automatic black level calibration, image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
● ISP can eliminate noise and dead point compensation
● Support image zoom
● Lens loss compensation
● 50/60Hz automatic detection
● Saturation is automatically adjusted (UV adjustment)
● Edge enhancement automatic adjustment
● Noise reduction automatic adjustment
key parameter:
(1) Photoreceptor array 640X480;
(2) IO voltage 2.5V to 3.0V (internal LDO power supply to the core 1.8V);
(3) power operation 60mW/15fpsVGAYUV;
(4) sleep <20μA;
(5) temperature operation – 30°C to 70°C;
(6) Stable operation 0°C to 50°C;
(7) Output format (8-bit)? YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data Light
(8) Size 1/6″
(9) Field of View 25°
(10) Maximum rms rate 30fps VGA Sensitivity 1.3V/(Lux-sec);
(11) Signal to Noise Ratio 46 dB;
(12) Dynamic Range 52dB
(13) Browsing mode line by line;
(14) electron exposure 1 line to 510 lines;
(15) pixel area 3.6 μm x 3.6 μm;
(16) dark current 12 mV/s at 60°C;

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.